Indy Dth Hammers Indy Dth Button Bits Australia, Indy Dth Hammers Indy Dth Button Bits Argentina, Indy Dth Hammers Indy Dth Button Bits Burkina Faso, Indy Dth Hammers Indy Dth Button Bits Ethopia, Indy Dth Hammers Indy Dth Button Bits EI Salvador, Indy Dth Hammers Indy Dth Button Bits Ghana, Indy Dth Hammers Indy Dth Button Bits Kenya, Indy Dth Hammers Indy Dth Button Bits Ivory Coast, Indy Dth Hammers Indy Dth Button Bits Liberia, Indy Dth Hammers Indy Dth Button Bits Mozambique, Indy Dth Hammers Indy Dth Button Bits Nigeria, Indy Dth Hammers Indy Dth Button Bits Quatar, Indy Dth Hammers Button Bits Srilanka, Indy Dth Hammers Button Bits Sudan Drilling Hammers Button Bits Oman Dth Hammers Button Bits Uganda
dthrotarydrilling
Select Your Language :
Saideepa
Saideepa
     
products
products
 
Indy series hammers are valveless hammers eliminating operational problems and improves reliability. It has an optimized air cycle frequency, high-energy impact giving maximum penetration rates. This heavy duty hammer is a multi purpose hammer. Where greater depth requirements demands less air usage with minimum performance loss.
And the main advantage is that the wear sleeve and piston are reversible providing longer service life, greater reliability with ease of maintenance and maximum operating cost effectiveness than any hammer.

These comes in a range of

• Indy 80 A Dedicated Tool For 8”(200mm) – 10” (254mm) Drilling and suitable with SD-8 Bit.

 



Indy 80 " Hammer Assembly


COMPONENT PARTS

   
QTY
P.NO
1.  Top Sub 1 No JB80 20001
2.  Check value 1 No JB80 20002
3.  Spring 1 No JB80 20003
4.  Air Distributor 1 No JB80 20004
5. Control Tube 1 No JB80 20005
6. Choke 1 No JB80 20006
7. Bufeer Ring 1 No JB80 20007
8.  Meatal Spacer 1 No JB80 20008
9. Lock Plate 2 No JB80 20009
10. Piston 1 No JB80 20010
11.  Wear Sleeve 1 No JB80 20011
12. Guide Bush 1 No JB80 20012
13. Bit Ret Ring 1 No JB80 20013
14.  Drive Sub 1 No JB80 20014


SPECIFICATIONS

1
Hole Dia
MM
200-300
2
Hammer Dia
MM
175
3
Cylinder Bore
MM
138
4
Pistone Stroke
MM
90
5
Piston Weight
KG
33.5
6
Hammer Length without bit
MM
1245
7
Weight without Bit
KG
140
8
Connection
API 41/2" PIN
9
Hammer Length with bit Extend
MM
1395
10
Hammer Length bit retracted
MM
1350
11
Size of back head wrench
MM
115
12
Suitable
SD-8

13.
Air consumption in CFM
PSI
CEM
150
   
200
750
   
250
850
   
300
1100


Indy 69

Indy 80


Indy 100